How To Fix Vornado Heater

the fan stopped spinning but the light is on,how to ready?

asked on April 29, 2016

Showing 1-x of 25 answers

Recently I noticed my Vornado would turn on, with indicator LED and you could hear the unit trip on when you lot plow the punch, but with no fan or rut. All I had to do was blast around inside with some compressed air, it fired right back upward. I'g assuming accumulated grit/gunk was preventing a circuit from completing. I've endemic information technology a few years and this is the only trouble I've ever had, and information technology was due to my lack of maintenance/cleaning.

33 of 33 found this helpful. Do you? | Report abuse

Fan stopped on me even on lowest settings sometimes plays slick and start to slow down until complete stop when I'g not looking. I just turned it off by the button for alil bit or unplug information technology blow into the vents sometimes I give it some light wacks and it'll first back up and keep running all night long

I had the aforementioned result and fixed it by using another fan on high and bravado into all the different air vents. When I plugged information technology back in, the fan started back up. I'm sure compressed air works better but this worked for me until I can buy a tin.

13 of 14 found this helpful. Do you? | Written report abuse

The construction of these are simple and the motor is there type that typically lasts a very long time. The chief culprit other than resetting is the ability switch itself. Afterwards awhile the contacts within the switch wear and fifty-fifty a part inside melts a pocket-size amount which doesn't allow the switch to operate properly.

Thursday… see more

The structure of these are simple and the motor is there type that typically lasts a very long time. The chief culprit other than resetting is the ability switch itself. Later awhile the contacts inside the switch wear and even a part inside melts a pocket-sized amount which doesn't let the switch to operate properly.

This is especially noticeable if the power switch doesn't have a firm snappy feeling when you operate it. Mine felt vague and a little soft, so information technology stopped working, even when it lights upward. The switch is easy plenty to replace but finding them isn't easy. I have found a commercial supplier and they've informed me that the ones they bear are discontinued and the manufacturer is no longer making them.

If you lot attempt and supercede it you only make sure information technology is rated at or in a higher place the original office. If yous utilise something with a lower capacity information technology will fail sooner than later due to the amount of current that flows through it. I am thinking of offer them for sale (they're not expensive). Good luck. meet less

The structure of these are simple and the motor is there type that typically lasts a very long time. The main culprit other than resetting is the power switch itself. After awhile the contacts inside the switch wear and even a part inside melts a modest corporeality which doesn't allow the switch to operate properly.

This is especially noticeable if the ability switch doesn't have a firm snappy feeling when you operate it. Mine felt vague and a little soft, then it stopped working, even when it lights up. The switch is easy plenty to replace simply finding them isn't easy. I take found a commercial supplier and they've informed me that the ones they carry are discontinued and the manufacturer is no longer making them.

If you try and replace it you lot just make sure information technology is rated at or above the original office. If you employ something with a lower chapters it will fail sooner than later due to the amount of current that flows through it. I am thinking of offering them for sale (they're non expensive). Skillful luck.

four of 4 found this helpful. Practise you? | Report abuse

I'm sick of buying these space heaters that quit after only owning them a month or and so. I idea I finally found a decent model with this Vornado. But this aforementioned verbal thing only happened to me, the fan quit spinning and the light is on... and I've just had the unit for virtually calendar month. At present I have to go through the annoying procedure of trying to get an exchange or refund, and co-ordinate to Vornado I'm going to have to pay for shipping. My solution for anyone with the aforementioned trouble... I highly recommend -Not- ever buying this product to begin with.

22 of 25 found this helpful. Do you lot? | Report abuse

Fan stops intermediate for last 1-two months even though temp is beneath the set temperature and now for last ane week or stopped and non starting. Is it completely damaged or there any pick to repair ?

1 of 1 found this helpful. Practise you lot? | Report abuse

Were yous e'er able to fix this? Mine has done the same thing for months. 75% of the time, if I turned the estrus up (equally another reviewer suggested), the fan would come back on, but 25% of the fourth dimension it would not. Now this month, the red light is on, but the fan won't operate at all, no matter the setting.

Carla

· Nov 22, 2016

9 of 10 found this helpful. Practise you? | Report abuse

I take tried everything but forced air I vacuumed eyes unplugged I dusted I brand sure information technology'due south working and every other style it tries to heat up but the fan doesn't work and I've had problems with it virtually since the beginning information technology finally died two days ago and cannot be revived despite what I do and I've only had it since 2019.

2 of 2 institute this helpful. Exercise you? | Report corruption

Mine did this too.
So, if I unplugged it for one-half an hr the fan would run over again but made a loud clunking dissonance. Then a weird electrical smell started.
I only no longer felt rubber with it in my bedroom.......and so I dumped it.
Merely I oasis't found some other heater as quiet every bit this brand.....and then it'south a puzzler as to what I should do.
I really LOVED how quiet it was. With my new heater I have to decide if I want to be warm........or sentinel TV.

3 of 3 plant this helpful. Practise you? | Report abuse

The first time I tried to use mine I sat it in a chair. The seat was just concave enough (so petty you lot almost couldn't encounter information technology) that the rubber switch would non be depressed causing the fan to not work. The red power light remained on. I so sat it on my kitchen counter that has a flat surface and it worked fine. … see more The starting time time I tried to employ mine I sabbatum it in a chair. The seat was simply concave plenty (so little you about couldn't see information technology) that the safety switch would not be depressed causing the fan to not work. The reddish ability calorie-free remained on. I then saturday it on my kitchen counter that has a flat surface and it worked fine. My solution, so I could ready it in the chair, was I placed a small piece of plywood in the chair and ready the heater on it - problem solved. When yous fix mine down you can hear a 'click' that indicates the switch depressed. The like shooting fish in a barrel way to check if this is your trouble, with the unit on, plough thermostat total on (#seven position), lift the unit of measurement and depress the safety switch. If information technology doesn't come on so telephone call customer service. If the surface is a piddling uneven yous can use double sided record to tape a quarter to the push - this volition help just even so go along the safety characteristic working in case of tip over. see less The showtime fourth dimension I tried to utilise mine I sat it in a chair. The seat was simply concave enough (and so lilliputian you lot most couldn't see it) that the safety switch would non be depressed causing the fan to not work. The cherry-red ability light remained on. I then sat it on my kitchen counter that has a apartment surface and it worked fine. My solution, so I could fix it in the chair, was I placed a pocket-size slice of plywood in the chair and gear up the heater on information technology - trouble solved. When you lot set mine down yous can hear a 'click' that indicates the switch depressed. The easy way to check if this is your problem, with the unit on, plough thermostat total on (#7 position), lift the unit and depress the safety switch. If information technology doesn't come on then call client service. If the surface is a little uneven you tin can use double sided tape to tape a quarter to the button - this will help but nonetheless go on the safety feature working in example of tip over.

3 of 3 found this helpful. Practice you? | Written report abuse

How To Fix Vornado Heater,

Source: https://www.amazon.com/ask/questions/Tx12BNEDR4176ML/

Posted by: caleyevout1997.blogspot.com

Share this post